Ozone Bottle Rinsing & Product Disinfection
Ozone systems are specifically designed for bottle rinsing and package disinfection.
Reduce Water Consumption
The Bright Blue can be supplied with our water-recycling skid, which captures and re-uses the rinse water. This can reduce water consumption from +/- 1000 litres per hour to around 500 litres per day.
Focus on Quality and Reliability
Built to the Highest Standards
The Bright Blue bottle rinsing and bottle disinfection system has been constantly improved and refined since the first unit was produced in 2001. The Bright Blue CCS complies with EU/ CE standards and conforms to the Coca-Cola Electrical & Mechanical Standards Specifications.
Our focus has always been on quality and reliability, so much so that many of our customers regard our systems as amongst the most reliable in their plant.
If maintenance and servicing procedures are observed then operational life of around 20 years can be expected.
Operation and Maintenance
Easy to Use, Easy to Maintain
The bottle disinfection system is extremely easy to operate and features software developed by Wassertec. Only occasional interventions are required to calibrate the system against an ozone test kit to ensure correct ozone readings are displayed.
The system is controlled by a full colour touchscreen Control Panel. Our unique interface features easy to read dials and icons. Operation is straightforward and intuitive with varying access levels for Operators, Administrators & Technicians.
We use 10″ full colour touch screens, which have optional Ethernet Connectivity.
With the system connected to a network it becomes possible to operate the Ozone Generator by remote control from a Desktop or Laptop PC with full access to all functionality.
Health and Safety
Run under Vacuum, De-Gassing and Ozone Removal
We run with the ozone cells under vacuum. This way if there is an ozone leak, air leaks into the ozone cell as opposed to ozone leaking out. This is inherently safer than running under pressure.
The top of our ozone/water contacting systems feature a special ozone resistant de-gas valve. This allows un-dissolved ozone to be vented safely away from the production area whilst maintaining tank pressure.
Under normal operation there should be no ambient ozone in the production area.
Ensuring Operator Safety
Designed with health and safety in mind. Our systems include built-in safeguards to ensure that operator’s lives are not put at risk and meet Coca-Cola Specifications (Electrical and Mechanical) for safety.
Dräger Ozone Leak Detectors
Our systems have a built-in interface for 2 Draeger ozone leak sensors. These are typically mounted in the bottling hall and in the ozone plant room. They are interlocked to the PLC. In the event of ambient ozone levels exceeding the OHS limit the ozone system will be shut down and a warning displayed.
The level of ozone in the water is controlled using a dedicated PID (proportional-integral-derivative) controller. This continuously measures the level of ozone and the rate of change against the user defined set-point.
The amount of ozone produced is then adjusted proportionally to the rate of change. This allows for very accurate control. The ozone set point is also linked to the “Ozone OK” interlock, so changing the set point automatically changes the value at which the interlock switches.
Contact Wassertec – Bottle Rinsing Systems