Ozone Bottle Cleansing

“Bottle rinsing and filling machine disinfection
Bottle rinsing with ozone was one if the first ozone applications for industrial use. It was an attractive alternative to chemicals and heat. Today, it is widely used as an integrated part of complete bottle rinsing and filling machines.
Bottle rinsing with ozone
In cases where non-sterilized bottles are filled with beer, soda or water, the inside of the bottle or can surfaces need to be sanitized or pasteurized after the filling process. It is especially important for reuse-bottles which do no come sterilized from the supplier.
Ozone versus chemicals
While some disinfection chemicals are common in the brewery industry, such as peracetic acid or hypochlorite, they leave residues after use which inevitably affect taste and product quality. Such chemicals can be removed by rinsing, however this may introduce unwanted particles or microorganisms which occur naturally in the supply water. Ozone use for bottle or can rinsing will solve both of these potential problems.
Ozone is the most effective commercially available disinfectant for industrial use. Hence, at very low concentrations it will sanitize bottle surfaces quickly. In addition it leaves no chemical by-products which eliminates the risk for spoilage. You can read more about ozone as a sanitizer at our Disinfection web page.
Ozone versus heat
In many cases, bottles and cans are pasteurized at temperatures up to 100 degrees C (212 F) following beverage filling for a number of minutes. This ensures that unwanted microorganisms are inactivated. Bacteria and other microbes are the major cause spoilage. While heat is an effective way to ensure product quality, it may affect unique tastes and aromas. Ozone offers and alternative which preserves the brew without chemicals or heat. Since ozone is applied cold, it is a major cost-saving operation compared to energy intensive pasteurization.
Practical use
Ozone concentration and time of sanitation should be suitably balanced during bottle rinsing. The time and concentration, referred to as the CT value in min.mg/L, to inactivate potential bacteria inside the bottles or the supply water depends on what strains of microorganisms. Normally actual ozone concentration during application should not exceed 1 ppm and should not be lower than 0.2-0.4 ppm to achieve and effective result with at least 3 log reduction of spores, bacteria or protozoa. Aqueous ozone is sprayed into the bottles through built in nozzle. Ozone quickly reverts back to its natural state: oxygen and does not elevate the oxygen levels that would normally be found in typical tap water.”
Thanks to Ozone Tech for this article.

___________________________________

 

At Wassertec we offer the following product for ozone bottle cleansing / rinsing:

 The most advanced ozone system for bottle rinsing & package disinfection currently on the market.

The Bright Blue 20G has been specifically designed to supply ozone infused water to bottle rinsers
so as to aid package disinfection. These systems have been in production and constantly
refined since 2001. They are found in Dairy, Juice, Wine & Water bottling plants throughout Africa.